Parquet repair

Parquet is perhaps one of the most reliable floor coverings, but even it requires repair. We will tell you how to repair the parquet ourselves.

First, you need to determine the cause of the damage. And already starting from it, find a method to eliminate it.

There are three main reasons: the low quality of the parquet, the violation of the technology of working with it and wear.

Marriage can occur from the poor quality of the parquet, and in violation of the masonry technology. Defects in the work are detected quickly and within the first year creaks may appear, individual rivets are loosened. The floor bends, begins to "play", cracks and crevices may appear. And here there is only one way out: disassembly and redoing of substandard masonry sections.

If your neighbors flooded you, or a pipe burst and your parquet was under water for some time, then after drying it may become unusable or completely recover. In the first case, you will need to remove the parquet, sort it, leaving only high-quality dies and buy the missing ones, thoroughly dry the floor and repaint.

But more often you still have to replace small sections or individual dies. And the difficulty here is the connection of the dies - the groove of the comb. And the whole difficulty lies in the fact that you have to disassemble the masonry to the wall to replace one die. However, it is not always possible to do this, therefore, more often with minor damage to the parquet caused by exposure to fire or chemicals and paints, scratches or bumps, scraping of the upper damaged layer is used or the damaged area is cut down (cut out).

In the first case, a looping is necessary, sometimes it can be replaced by grinding. If the damage is superficial, then grinding is possible, but, in case of deep damage, it is necessary to completely change the site, and not insert "plugs".

For high-quality cutting and replacement of damaged parquet, prepare the material. Select the dies according to size, ready-made or adjust the large dies to the desired size. Of course, the hardest thing is to choose a color, so take the dies from unpainted wood and pick up the color with a stain.

If it is necessary to replace several dies, then use a chisel, remove the die piece by piece from the coating. After removing, we clean the rivets and the floor from dirt, dust, and glue residues. We are restoring the prepared area. To install the last dies, cut off the lower protrusion and ridge at the groove, lubricate the rivet with glue and drive in, the protrusions must be cycled.

The parquet needs to be repaired, even if the damage has been caused by time. The varnish protects the parquet for up to seven years, and if you rub it with mastic, then scratches and dents that form over time, of course, spoil its appearance. And the only thing that will help you is removing the top layer by grinding with further rubbing or varnishing.

By repairing the parquet in this way, you will give it the look it originally had. And in case of minor damage, use a gap filler, which can be used during the care of the parquet floor. MostBet casino and sports betting bonuses and promo codes. Lets start with Mostbet India betting company and get your perfect bonus of up to 150% on your first bet! If you have a Use the Mostbet promo code get free welcome bonus 125% up to Rs 34000 + 250 free spins. Mostbet when registering to get the best welcome bonus up to $300 or currency equivalent can be claimed when using this code. Our bookmaker is sharing 30% up to 5,000 Indian Rupees and offering to take part in betting on sports. Explore the world of online sports betting and casino gaming with Mostbet.